AIC J2024-01, User Manual, Page: 52 / 94

Chapter 3 Sub-System configuration Setup
J2024-01 User's Manual
46
3.4.12 How to power off/on all disk drives automatically
This feature is applicable for SAS/SATA drives. If there is no connection with
any active SAS initiator by checking all wide ports, AIC Expander Controller
powers off all attached SAS/SATA drives to save power consumption.
Otherwise, AIC Expander Controller powers on all attached SAS/SATA drives
to provide drive access service to any active SAS initiator.
(A) Apply the following commands on the COM port.
cmd> check_wide_port standby
cmd> reset
cmd >
cmd >
cmd >
cmd >
cmd >
cmd >
cmd >
cmd >
cmd >check_wide_port standby
Succeeded to configure checking wide port
cmd >reset_
WARNING : This function is not recommended to use with
RAID card since RAID card limitation.