![background image](http://html1.mh-extra.com/html/ai/2-4gandai-bs-ws40-v/2-4gandai-bs-ws40-v_user-manual_2870665004.webp)
4
/
27
scan one or more Settings
(
3
)
Scanning
:
scan “@END”.
(
4
)
Some functions can be set directly. such as “pairing”, “discharge pairing”
3.2 The data format of setting command
Table 3.3-1 The data format of setting command table①
Prefix
Target
Type
Parameter
WN-
T-/R-/W-
Reference the data format
of setting command table
*****
Note ①The format does not include access Settings and save exit setup instructions.
3.3-2 Setting mode format and data analysis
Format
Data
Description
Prefix
WN-
The Fixed prefix characters
Target
T-/R-/W-
T-: It means the setting barcode work on the receiver
directly
R-: It means the setting barcode work on the receiver
directly, The setting barcodes of the receiver need to
be forward by the sender through wireless
transmission
W-: work on the sender and the receiver at the same
time
Type
Consult the table of setting type
Parameter
The parameter is four characters in the range “0-9”
3.4 Setting type
3.4-1 The table of setting type
Type
Description
A
Wireless pairing/discharge pairing
B
Language settings
C
Check the Firmware info/Change the frequency
D
Auto trigger switch
F
Real-time mode /Inventory mode /Data operation for Inventory
mode
G
Sleep times
H
Restore the factory settings
I
Data transfer form\Prefix mode setting\Custom end symbol
K
The sender/receiver firmware update command
L
USB Wired output switch
3.5
“Enter setting”and“Save&Exit”
Command
:
Function
Command Barcode
Remark
Enter setting
@SET
Enter setting mode
,
For 20 seconds
time effectively
Exit & Save
@END
Exit & Save