11
/
27
test
*Disable
connection
test
WN-T-C0002
When multiple scanners are
connected to a receiver,
connection detection needs to
be turned off. The factory
default is to disable connection
detection.
@END
4.11 The sender wired output
Function
Command
Barcode
Remark
@SET
* Enable USB wired
output
WN-T-L0000
1. After open the sender after
the PCB via USB cable
connection, connection can
be directly through the
normal USB transmission, do
not use the wireless
transmission
Disable USB wired
output
WN-T-L0001
Shut down after insert USB
cable only allows charging,
only through wireless data
transmission
@END
Note
☆
:USB wired output is used only for the sender
4.11 Wired connection (USB/USB VCP COM)
★
Function
Command
Barcode
Remark
@SET
*USB mode
WN-W-L1000
USB interface
USB VCP COM
WN-W-L1001
USB virtual serial port need
to install the serial port
(USB) driver can be normal
use
