8. Display and operating controls
Analog outputs
For analog outputs, the analog output type,
the assigned measurement loop (reference
channel) and the effective output signal are
displayed at the corresponding terminals.
Trigger inputs
With
trigger inputs
the configurable trigger
source can be seen on the device itself; the
fields that follow show the trigger function, the
activation status, and the contact assignment
in the plug connector; this information if help-
ful when connecting.
8.4 Device configuration
In this menu the display illumination and the
internal alarm signaling device can be config-
ured and, if necessary, the watchdog function
can be activated. The desired function can be
selected by means of keys
PROG
and
▲
/
▼
. Programming is by means of the
softkeys
<ON>
,
<OFF>
or
<SET>
and input is
by means of keys
PROG
,
▲
/
▼
...,
PROG
.
Illumination
To switch display illumination ON press :
<☼ON>
Illumination
To switch display illumination OFF press
<☼OFF>
Illumination
-
To save battery consumption the duration
Duration : 20 seconds
of display illumination can be set by means of :
<SET>
or
PROG
,
▲
...,
PROG
To switch illumination ON permanently,
Symbol: - -
To switch back ON again without this function press
ON
or
<MENU>
Alarm tone
Normal short alarm tone on each change :
Symbol:
ON
Having selected the function
Alarm tone
the beeper can be reprogrammed by means of :
PROG
,
▲
/
▼
...,
PROG
e.g switched off by means of :
Symbol:
OFF
Assign relay ports configured in any way :
Symbol:
Px
In permanent alarm status :
Symbol:
`Px´
flashes.
To switch this signal OFF press
(
<MENU>
)
,
<OFF>
8 ALMEMO 8006-RTA3
