Ahlborn ALMEMO 5690-2M Operating Instructions Manual Download Page 12 | Manualshive

Page: 12 / 92

background image

5. Introduction

5. INTRODUCTION

The data acquisition system

ALMEMO

®

5690-2M is a new member in our fam-

ily of unique measuring devices - all equipped with Ahlborn's patented
ALMEMO

®

connector system. The intelligent ALMEMO

®

connector offers deci-

sive advantages when connecting sensors and peripherals because all parame-
ters are stored in an EEPROM located on the connector itself; repeat program-

ming is thus no longer necessary.
All sensors and output modules can be connected to all ALMEMO

®

measuring

instruments in the same way. Programming and functioning are identical for all
units. The following points apply to all devices in the ALMEMO

®

measuring

system; these are described in detail in the ALMEMO

®

Manual which is in-

cluded in delivery with each device.

Detailed explanation of the ALMEMO

®

system (Manual Ch 1)

Overview of the device functions and measuring ranges (Manual Ch 2)

Basic principles, operation, and technical data for all sensors (Man. Ch 3)
Options for connecting your own existing sensors (Manual Ch 4)

All analog and digital output modules (Manual 5.1)
Interface modules RS-232, optic fiber (Manual 5.2)
The whole ALMEMO

®

networking system (Manual 5.3)

All functions and their operation via the interface (Manual Ch 6)

Complete list of interface commands with all the print layouts (Man. Ch 7)

The operating instructions you are now reading cover only those features and

controls that are specific to this device. Many sections therefore also refer to
the more detailed description in the Manual; (see Manual, Section xxx).

5.1 Functions of the ALMEMO 5690-2M

The data acquisition system ALMEMO

®

5690-2M has basically 9 electrically

isolated measuring inputs with over 70 measuring ranges - suitable for all
ALMEMO

®

sensors. This number can, using various selector switch boards,

be extended to 99 inputs. To accommodate these various expansion stages

the desktop housing is available in 32-DU / 84-DU sizes and a 19-inch rack is

available. For operation purposes the device incorporates an LCD graphics

display and a soft-key keypad with cursor block. The display can be adapted

by means of configurable user menus to suit any application. Thanks to the

real-time clock incorporated as standard and with a SD card the amount of

data you can record is virtually endless. A variant is available with an inte-

grated 512-KB EEPROM memory sufficient for approx. 100,000 measured val-

ues. With optionally Module RTA5 available to 10 internal connections any
ALMEMO

®

output modules, e.g. analog output, digital interface, trigger input,

or alarm contacts. Several devices can be networked by simply linking them

together via cable.
The system is fed by default via a 12-V mains adapter. There is also the option

of using a rechargeable battery module.

12 ALMEMO

®

5690-2M

«
...
10
11
12
13
14
...
»

Summary of Contents for ALMEMO 5690-2M





























































































Reviews:

No comments

Related manuals for ALMEMO 5690-2M

Brand: AR Pages: 20

Brand: jenway Pages: 20

Brand: Aaronia Pages: 47

Brand: Keithley Pages: 55

Brand: Taber Pages: 53

Brand: Gardner Bender Pages: 7

Surface Scatter 7 sc

Brand: Hach Pages: 6

Brand: Hach Pages: 118

Brand: Hach Pages: 388

Orbisphere 51 Series

Brand: Hach Pages: 118

ORBISPHERE 3650 Atex

Brand: Hach Pages: 51

Brand: Hach Pages: 72

POLYMETRON 8362

Brand: Hach Pages: 78

Pocket Colorimeter II

Brand: HACH LANGE Pages: 146

Brand: Hach Pages: 146

Brand: Hach Pages: 36

PHOSPHAX indoor sc

Brand: Hach Pages: 104

Lange ORBISPHERE 3100

Brand: Hach Pages: 384

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands