5.4 Data input
Numeric parameters are programmed as follows :
Select the desired function by pressing the
FUNCTION
key
Start programming by pressing the
PROG
key.
The front digit flashes and can now be changed.
Increment the digit by pressing the
▲
key .
If you overshoot the highest value, you start again at zero.
Decrement the digit by pressing the
▼
key.
If you go below zero, you start again at the highest value (9 or 5)..
To change the arithmetic sign press the
±
/
ESC
key at the first digit
or cancel this input with effect from the second digit
To move forwards to the next digit press the key.
To move back to the previous digit, press the key
and hold down
To terminate programming
After setting the last digit press the key again
To delete measured values and reset the programming
press the keys :
FUNCTION
PROG
± / ESC
22
ALMEMO
2390-5
CLEAR
PROG
1s
Display and keypad
