35
en
DEVICE SETTINGS
DATE AND TIME SETTINGS
Before the first use of the thermometer and after
each replacement of batteries, date and time are
displayed in the format 1-1 00:00.
Perform a step-by-step setup of the device:
•
Press and hold the
ON\OFF
button for 5
seconds.
•
Set the year (from 20 to 35) by pressing the
START
button.
Press the
ON\OFF
button again.
•
Set the month (from 1 to 12) by pressing the
START
button.
Press the
ON\OFF
button again.
•
Set the day (from 1 to 31) by pressing the
START
button.
Press the
ON\OFF
button again.
•
Set the hour (from 0 to 23) by pressing the
START
button.
Press the
ON\OFF
button again.
•
Set the minutes (from 0 to 59) by pressing
the
START
button.
Press the
ON\OFF
button again to complete
the setup
.
REPRODUCTION OF THE PREVIOUS READINGS
You can recall up to 9 measurement values.
1
Press the
START
button.
2
The display will show the memory location
number, then the value.
3
Press the
START
button to switch memory
locations.
When recording new measurement values (after
the 9th value), old values are deleted automatically.
9
