https://www.agrotkindustrial.com/
11
Maintenance Schedule
This brush cutter attachment will provide years of dependable service if routine
maintenance procedures are performed. The maintenance tasks listed below are
based on normal operating conditions. More frequent maintenance may be necessary
with intense use or when operating in adverse environmental conditions.
MAINTENANCE TASK
BEFORE EACH
USE
WEEKLY
WEEKLY
Check skid steer loader hydraulic fluid level.
Add fluid as necessary.
√
Check that all fasteners (nuts, bolts,, washers,
pins, keepers) are in place. Tighten as
necessary.
√
Inspect and replace any worn, torn, or missing
safety decals.
√
Inspect hydraulic plumbing (hoses and
connectors) for damage or leakage. Repair or
replace hydraulic items as necessary.
√
Check condition of cutter blades. Sharpen or
replace as necessary.
√
√
√
Check oil level in bearing housing. Add fluid
as necessary.
√
Change oil in bearing housing. * Change oil
after 50 hours of first time use, then every
1000 hrs or yearly.
√
Wash Brush Cutter
√
Check brush cutter for major scratches and
dings. Sand and repaint these areas to
prevent rust damage. *Use a paint formulated
for farm equipment which can be found at your
local hardware store.
√
Lubricate all pivot joints.
√
