https://www.agrotkindustrial.com/
10
Maintenance Overview
The maintenance procedures described in this manual should only be carried out by qualified
mechanics who have been trained to repair this machine.
Some procedures require special tools and skills to complete. DO NOT attempt to repair or
perform service work on this machine unless you have the skills and tools to do so. Contact
your local dealer for maintenance and repair services.
NOTICE
Improper maintenance or modifications to the design or performance of this
machine will void the warranty. ONLY use genuine SPARTAN EQUIPMENT
replacement parts on this machine.
Safety Instructions
Obey the following safety instructions when servicing or repairing this machine.
Wear proper Personal Protective Equipment (PPE) while working on this machine, which
may include safety glasses, hard hats, steel toe boots, gloves, etc.
Wear a welding helmet when welding to protect your eyes, face and neck from flash burn,
ultra-violet radiation and heat.
Ensure all jack stands, lifts and hoists are in good working condition and have the rated
load capacity to support the load.
If servicing is performed while the brush cutter is attached to the skid steer, turn engine
off, set parking brake and chock wheels to prevent skid steer from moving.
Only perform service work in a well-lit area.
Allow the machine to cool down before servicing this machine. Hot oils can burn your
skin.
NEVER work under an unsupported cutter deck.
