30
12/ Ensure that everything is correctly connected and locked and that no there are no foreign
bodies on the machine.
Point of convergence:
The point of convergence can be adjusted to improve the tractor's traction, stability and grip.
This also affects the tractor's lifting capacity.
On a tractor with 2 drive wheels, the point of convergence
must be near to the centre of the tractor.
On a tractor with 4 drive wheels, the point of convergence
must be towards the front drive axle.
Depending on the working conditions, the tractor's push bar can be positioned in a fixed hole
or in the slotted hole.
To follow the land better, it is recommended to use the slotted hole.
If the slotted hole is used, make sure that the coupling pin is in the middle of the slot at all
times.
Parking:
1/ Ensure that the machine is unhitched on stable ground.
2/ Unlock the machine before unfolding it.
3/ Unfold the machine if it folds.
4/ Disconnect the hydraulic hoses if the machine is fitted with them.
5/ Disconnect the plug for the lighting equipment.
6/ Unhitch the machine.
3.1.2.2.
Trailed machine
Hitching a trailed machine:
1/ Ensure that the machine is on stable ground.
2/ Bring the tractor up to the coupling on the machine.
3/ Hitch the machine to the coupling ring or the tractor's links depending on the type of
drawbar fastening.
Take into account the clearance, in particular to ensure that there is
room to pass under bridges and low power lines
