2. If there are wheels you have to oil the hubs roller-bearing every 30 hours.
3. Each blade COMBIPLOW 31+ is equipped with a shear bolt which breaks when blade accidentally
come across an obstacle. To replace it you have proceed as following:
−
Lift the COMBIPLOW 31+
about 15 cm off the ground and block it in that position with the
tractor motor off and the parking brake on
−
Take off a damaged bolt
−
Put again the blade in the working position and fasten it with a new bolt. USE ONLY PARTS
OF AGRISEM INTERNATIONAL
4. The ploughshares are fixed by a bolt. When replacing these parts, check that the new ones have
been supplied by AGRISEM INTERNATIONAL. All the parts are made from specially treated
steel, thus it is not advisable to solder them or else the thermal treatment loses its efficiency.
VII – Advice for optimal use
Before all usage, make sure that all safety instructions are followed and that the machine has been
greased and maintained correctly.
To obtain good results the soil cannot be too humid or too dry: the soil has to bend at the blade
passing and produce enough of fissures.
When the soil humidity is great, slipping could degrade the superficial soil structure. It is better to use
a tractor with four-wheel drive to reduce sliding.
The degree of the soil loosening depends on the working depth, the distance between blades and the
working speed.
When the depth is 25-35 cm, the distance of 50 cm between the blades ensures the complete
loosening in the most of conditions. When you work mostly on the surface you might have to use
TWINPLOW (winged) ploughshares. The working speed depends on the conditions and usually is 5-8
km/h. Higher is the working speed, more important is the loosening.
Before starting to work verify the following list:
−
Are the wearing parts in good condition and fixed correctly?
−
ls there enough ballast on the front of the tractor to lift the COMBIPLOW 31+?
During the work verify that the COMBIPLOW 31+
is correctly coupled and perfectly horizontal
when working, in the longitudinal and transversal sense.
If required, consult your tractor’s manual to study all safety aspects and adjustments for raising
the tractor in order to optimize the use of your material.
The correct use of the COMBIPLOW 31+
optimizes and ensures a good planting of your crop.
AGRISEM INTERNATIONAL can not be held responsible for soil degradation or a result which is
not up to your expectations. The user must make his own decisions and assume the risks taken
should his machine be used incorrectly or inappropriately.
13