Disc
⇒
The discs must be replaced as soon as their diameter reaches the following values.
AGRISEM INTERNATIONAL can not be held responsible if the DISC-O-MULCH is
used with discs that have a level of wear and tear superior to that specified.
⇒
To replace the discs :
a. Lift the DISC-O-MULCH about 15 cm off the ground and block it in that
position with the tractor motor stopped and the parking brake on.
b. Take off the damaged disc.
c. Put on a new one.
Only use original AGRISEM INTERNATIONAL parts
Worn spare parts
All the parts are made from specially treated steel, thus it is not advisable to solder
them or else the thermal treatment loses its efficiency.
Masse à eau
At times of important drops in temperature, don’t forget to empty your water ballast to
avoid freezing
Disc diameter
Maximum diameter of wear
and tear.
Ø510
Ø560
Ø 420
Ø610
10