8
the plug.
15.
Do not disconnect the plug from the mains socket by pulling on the cable.
16.
Only ever operate the mill on a flat, stable surface. The mill must be
positioned so that slipping of the mill itself or the flour container during the
milling process cannot occur. It is best to place the mill on a firm surface,
(such as a kitchen worktop). This will ensure that the ventilation slots on the
underside of the mill, which serve to ventilate the motor, remain free.
17.
Strict monitoring of the appliance is essential when being used by children.
18.
Strict monitoring of the appliance is essential when being used in the vicinity
of children.
19.
Never operate the mill unless under supervision.
20.
Always keep the mill out of the reach of children.
21.
The appliance must not be operated by persons with either physical or mental
handicaps or those who do not have sufficient knowledge of the safe
operation of the appliance. The exception to such operation of the appliance
is when used under supervision of persons responsible for the safety of any
handicapped persons
22.
Never immerse the mill or parts of the same into water or other liquids.
Never connect a wet plug to the mains socket or touch it if your hands are
wet.
23.
Any screw fittings which require a screw driver to open must not be opened.
24.
Industrial motors can be damaged by longer periods of idle running. After
Use, please always turn the motor off immediately.
Intended use:
Our mill MT 12 is designed and constructed for domestic use. The appliance is
intended for the milling of such grain types as listed in the owner's manual.
Short Guide:
1.
Connect the plug to the mains socket
2.
Place a suitable container under the flour spout
3.
Switch the motor on
4.
Roughly adjust the degree of fineness setting
5.
Add the grain
6.
Re-adjust the desired degree of fineness setting.
7.
At the end of the flour production turn the motor off
