Agrint COUNTRY, Use And Maintenance Manual

Page: 13 / 20

13
4. HOES SUBSTITUTION
a) To change the hoes, operate as follows :
1. Unscrew the two nuts "A" that lock the screw of the hoes to change.
2. Take out the two screws from the holes and take out the hoe “B”.
3. Put the new hoe using the new screws enclosed.
4. Lock with the nuts "A".
5. Repeat these operations for all the hoes to change.
ATTENTION: on each flange are assembled 2 or 3 right hoes and 2 or 3 left hoes.
5. CHAIN SUSTITUTION
a) To change the chain, operate as follows :
1. Drain the oil from the carter making the first three phases showed at point "b)" chapter “3”.
2. Remove the carter unscrewing the 10 screw.
3. Keeping out of its place the chain adjuster "C" remove the connection mesh “A” and take out chain "B".
4. Assemble the new chain, make sure to put well the safety spring of the connection mesh.
5. Assemble the carter using the new seal supplied with the new chain.
6. Put new oil in the carter making the last two phases showed at point " b)” chapter “3”.