Agrint ARIETE, Original Use And Maintenance Instructions

Page: 17 / 27

17
6.
D
RIVING BELT
R
EGULATION AND REPLACEMENT.
a) In order to regulate the driving belt:
1. Take apart the “F” protection case by unscrewing the ten “E” bolts.
2. Unscrew the “B” counternuts nuts and screw “A” nut in order to tighten belts or unscrew the “A” nut to
loosen them. The tension is correct if the belts yield a bit when pressing them on their exterior side with
your thumb
3. the belt is regulated, screw the “B” counternut again and put the “F” belt protection back at its place.
b) To replace the driving belts, read the following instructions:
1. Remove the “F” belt protection by unscrewing the ten “E” bolts.
2. The “B” counternut and unscrew the “A” lock nut completely.
3. Remove the two damaged “D” belts. In order to avoid any tension problems, both of them have to be
substituted with two new belts.
4. Repeat the steps “2” and “3” of the “a” paragraph.