AgriMetal GR-400, Operator'S Manual

Page: 47 / 76

39
Fig. 25 WORKING
9. Travel Speed:
Set the travel speed appropriate for the job
being done. Do not exceed 5 mph (8 k/h)
to minimize bouncing while rolling.
10. Travel Pattern:
A variety of driving patterns can be used
when rolling a green. However each opera-
tor is responsible to develop their own pat-
tern appropriate for the shape of the green.
Start by rolling back and forth from side to
side and turning at the edge of the green.
11. Turning:
Use the steering wheel in combination with
the directional pedals to pivot the right roller
and turn the machine.
12. Pin:
Remove the pin from the hole when rolling
to prevent any damage. Replace it after
rolling the area.
Right
Left
Fig. 27 TURNING
Fig. 26 ROLLING