7
a. Slide the throttle wire through the cable adjuster . Line up the "slotted" swivel with the wire,
making sure the hole for the wire end is opposite the cable adjuster. (See arrow.)
b. Once the throttle wire is attached to the carburetor, locate the other end of the throttle wire and
insert the wire end into the throttle lever hole. While pulling on the throttle wire (outer part)
insert the throttle wire sleeve -into the hole in the throttle lever.
CONNECTING THE THROTTLE LINKAGE
1. Fuel
Fuel for this engine requires a mix of leaded or
unleaded gasoline and 2 cycle engine oil. Never
operate the weeder with unmixed or straight
gasoline as it will cause rapid and permanent
damage to the engine. Mix your gasoline with a
high quality 2-cycle oil that is made to mix at one
specific ratio of 50:1. We recommend that you select
a 2 cycle oil that meets or exceeds FC requirements.
OPERATING INSTRUCTIONS
CAUTION
Do not use gasohol or gasoline that contains alcohol. Always use fresh gasoline. Never
attempt to mix the gasoline and oil in the fuel tank of the engine. Always mix your gasoline
in a clean gasoline container. Once mixed, shake the container vigorously so the oil mixes
with the gasoline.
