3
Keep machine in safe working condition. Check all fasteners at frequent intervals for proper tightness.
Never store the machine with fuel in the fuel tank inside a building where ignition sources are
present such as hot water and space heaters, clothes dryers, etc. Allow the engine to cool before
storing in any enclosure.
Always refer to the Owner's Manual for important details if the tiller is to be stored for any
extended period.
Take a minute or two to familiarize yourself with each component of the WEEDER listed below. The
only tool you'll need to assemble the E-Z Tiller is an allen wrench, and we've included one.
Contents of Shipping Carton
1 - r Frame
1 - Engine
4 - Tines
2 - Snap Pins
1 - Owner's Manual
1 - Allen Head Wrench tool kit
1 - float
MAINTENANCE & STORAGE
WHAT'S INSIDE THE SHIPPING CARTON
6. Stop the engine whenever you leave the operating position. Also disconnect spark plug wire
before unclogging the tmes and when making any repairs, adjustments, and inspections.
7. Take all possible precautions whenever you leave the machine unattended. Always stop the
engine. Never leave engine unattended while running.
8. Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving
parts have stopped.
9. NEVER run engine indoors. Exhaust fumes contain CARBON MONOXIDE which is an
ODORLESS and DEADLY POISONOUS GAS.
10. Never operate the tiller without proper guards, plates, or other safety protective devices in place.
11. Keep children and pets away from the tiller while it is running.
12. Do not overload the machine's capacity by attempting to till too deep at too fast a rate.
13. Never allow bystanders near unit.
14. Never operate the tiller without good visibility or light.
15. Be careful during cleaning not to get the engine or start switch wet, as this may cause the
electrical system to short circuit. If the engine or switch becomes wet, dry before use.
