CUTTING THE LIMB OF A FALLEN TREE (Fig.19)
Before starting work, check the direction of bending force
inside the log to be cut. Then make the initial cut from the
bent side (Fig.19 No.1) and finish by sawing from the oppo
-
site side (Fig.19 No.2). Always finish cutting from the oppo
-
site side of bending direction to prevent the guide bar from
being caught in the cut.
WARNING: When cutting a limb that is under tension, be
alert for spring back so that you will not be struck when the
tension in the wood fibres is released.
MAINTAINANCE AND CLEANING
In order to maintain your chain saw in proper working order,
perform the maintenance and checking operations described
in this manual at regular intervals. Leave all maintenance other
than the items listed in the Owner’s
Manual to your competent servicing dealer. Repairs and ser
-
vicing must only be performed by authorized dealers and
service agents.
Before cleaning, inspecting or repairing the chain saw, make
sure that engine has stopped and is cool. Switch off and dis
-
connect the spark plug to prevent accidental starting during
maintenance and cleaning.
WARNING:
The metal engine parts are at high temperatures
immediately
after stopping the engine.
MAINTENANCE AFTER EACH USE
Check all the chain saw parts for wear after every use,
particularly the chain, bar and sprocket.
Summary of Contents for AM-CS-5918HC
