background image

Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ 

Orderline: 0117 934 1790 Fax: 0117 934 17 91 

Order on-line: www.agriframes.co.uk

 

28.

 

Secure 4 panels between the top ring and the first spacer bar, using the lattice ties. 

29.

 

Secure 4 lattice panels between middle and bottom Spacer bars, using the lattice ties. 

 

Ensure that the panels are centred within each bay. 

 

Please Note: you may need to slightly bend the lattice panel to form a curve in the line.  

30.

 

Trim the ends of the lattice ties.  

 

If you have any questions regarding assembly please call our customer service team on 0117 934 1790

 

If you have any questions regarding assembly please call our customer service team on 0117 934 1790

26

27

28

Summary of Contents for 30525-TBK

Page 1: ... 1 Wood 001 Wood Block 1 AGR A610 39 5 8 Moisture Seal Black 4 AGR A74 001 M4x20mm Socket Cap Head Screw St Steel 4 AGR A75 000 M4 Form Washer St Steel 8 4AGR A74 002 M4 x 25MM Socket Cap Head Screw St Steel 4 AGR A72 001 M4 Hexagon Full Nut Stainless Steel 8 AGR A622 03 3 4 x3 4 Parallel Clamp 4 Issues If you are experiencing any issues with your Agriframes product please contact our customer ser...

Page 2: ... of the pieces of the Top Ring 12 Push a Top Ring pieces through the 2 Way connectors on the Gothic curves Attach the poles to one another covering the joins between the poles with a moisture seal 13 Ensure that the Top Ring is concentric and level to the Gazebo once satisfied tighten the 2 Way Connectors onto the Top Ring and onto the Gothic Curves Please read the assembly instructions carefully ...

Page 3: ...other Spacer Bar and position the second Spacer Bar 40 above the bottom Spacer Bar and tighten the grub screw 21 Slide a moisture seal over the reduced end on the uprights Lift the Top of the Gazebo onto the uprights 22 Lift the constructed Gazebo Top onto the uprights ensure that the Gazebo Top is lowered evenly onto the uprights 23 Cover the Joins with moisture seals 24 Position the top Spacer B...

Page 4: ...ls between middle and bottom Spacer bars using the lattice ties Ensure that the panels are centred within each bay Please Note you may need to slightly bend the lattice panel to form a curve in the line 30 Trim the ends of the lattice ties If you have any questions regarding assembly please call our customer service team on 0117 934 1790 If you have any questions regarding assembly please call our...

Reviews: