background image

1 Safety Instructions 

 

 

Remote-controlled High Grass Rotary Mulcher 

agria 9600-80

 

General safety and accident prevention regulations 

Basic rule: 

 

Familiarize yourself with the entire con-
tents of these operating instructions 
before commissioning the machine. 

Be aware of the local conditions when 
using the machine and always distin-
guish between safe and unsafe use. 

Please observe the relevant accident 
prevention regulations as well as the 
generally recognized rules pertaining to 
safety, occupational health and traffic 
laws. 

The use of public transportation routes is 
subject to the Road Traffic Act in its 
latest version. 

Please check the traffic and operating 
safety of the machine before each com-
missioning! 

The machine may only be used, ser-
viced and repaired by  persons who are 
familiar with it and have been instructed 
in the hazards involved. 

The appliance may only be used by 
responsible adults who know these 
operating instructions and are familiar 
with the appliance. It must not be used 
by inexperienced persons or children. 

 

Never use the machine in the presence 
of children or animals. 

Never let children play with the machine, 
it is not a toy. 

Only use the machine when there is 
sufficient ambient light and never use it 
when under the influence of alcohol, 
medications or drugs. 

The affixed warning and information 
signs provide important information for 

safe operation; please observe them for 
your own safety! 

The engine must be switched off for 
transport on motor vehicles or trailers 
outside the working area. 

Be careful with rotating tools -  keep a 
safe distance! 

Be careful with coasting tools. Before 
you start working on them, wait until they 
have come to a complete stop! 

There is a risk of crushing and shearing 
on power-operated parts! 

Riding on the implement during opera-
tion is not permitted. 

Match the operating speed to the condi-
tions.  

Do not adjust the setting of the engine 
speed governor. A high speed increases 
the risk of accidents. 

Working area and danger zone 

The working area is the entire area to be 
worked on. The user is responsible for 
third parties in the working area. 

Staying in the danger zone of the ma-
chine is not permitted (see page 31). 

 

 

Keep children and third parties away 
from the working area of the machine. 
Stop the machine immediately if people 
approach the working area. 

Before you start work, check the entire 
working area for foreign objects (stones, 

Summary of Contents for 9600-80













































































Reviews: