4 Commissioning and Operation
46
Remote-controlled High Grass Rotary Mulcher
agria 9600-112
Working with the machine
Move the machine to the working area and
stop with the mowing deck over a clear space.
Use the joystick (B/1) to adjust the forward speed
of the machine and steer it.
From the perspective of the operator standing be-
hind the machine in the direction of travel, slowly
move the joystick:
- up = forward
- down = reverse
- to the left = left, - to the right = right.
The machine's speed depends on the position
of the joystick.
Use the joystick on the remote control care-
fully and avoid sudden changes of direction.
Move the machine slowly, so that you can
become familiar with the machine and check that
the commands are executed correctly. Note that
the direction commands must be executed in re-
verse when driving backwards.
Set the required cutting height with the mowing
deck up / down switch (B/7). The cutting height is
shown on the display (B/2). It can be changed
during operation and also when the engine is off.
Select the travel speed range with the travel
speed selector switch (B/3). Choose position 1 to
3 for mulching, depending on the vegetation. Only
use position 4 to move the machine with-
out mulching.
Increase the engine speed to
full throttle
with
the rpm switch (B/4) (press + rpm).
Summary of Contents for 9600-112
