Agria 5300 Operating Instructions Manual Download Page 31

Page: 31 / 68

4 Commissioning and Operation

Meadow mower

agria 5300

Starting the petrol engine

Never start or allow the engine to run in

enclosed rooms or rooms that are not venti-

lated.
It is essential to ensure for sufficient ventila-

tion and a quick extraction of the exhaust

fumes. The exhaust fumes contain carbon

monoxide that is highly toxic when inhaled.

Plug on the sparking-plug connector

1. Open the fuel cock (B/13)

Cold

engine: Set CHOKE actuator (B/5) to

"CHOKE". Reset CHOKE when the engine is

hot

Engine

at operating temperature

: Leave

CHOKE in normal operating position

Switch off the mower drive

3. Set engine stop switch (B/14) to operating

position ("

4. Set speed regulating lever (C/9) to approxi-

mately 1/3 throttle

5. Start the engine from outside the hazard

zone:

Hold the starter rope at the starter handle

(B/7) and pull it out

vigorously

and

rapidly

to start the engine. Guide the handle back af-

ter the engine has started. Do not allow it to

shoot back.

6. Once the engine is running, set the engine

speed to min and allow the engine to warm

up for a short time. Slowly move the choke

actuator back to operating position (if actuat-

ed).

Summary of Contents for 5300





































































Search results

Summary of Contents for 5300

Reviews:

Agria 5300, Operating Instructions Manual, Page: 31 / 68

Search results

Summary of Contents for 5300

Reviews: