Agria 5300 Operating Instructions Manual Download Page 22

Page: 22 / 68

3 Devices and Operating Elements

Meadow mower

agria 5300

Mower drive

The mower knives are driven by a crank drive.
The mower drive is switched on/off at the shift

lever (C/7).
Switch the mower drive only when the clutch is

disengaged (neutral).

Steering bar

Adjust the steering bar only when trac-

tion drive and PTO drive are switched off -

risk of accident!

Steering bar height adjustment

•

Unscrew the hexagon head screw (2) from

the square clamping piece (3) and pull it out

of the articulated bar element.

•

Adjust the handlebar to the desired level and

fit it into the matching hole in the articulated

bar element.

•

Insert the hexagon head screw. Screw it into

the square clamping piece (ensure that the

nose of the clamping piece is locked in the

oblong hole of the locating jaw of the articu-

lated bar element in the lower bar) and

tighten it.

Steering bar side adjustment

•

Release the grip screw (1) until the notches

are released.

•

Swing the steering bar to the required side,

and let it engage in the proper meshing.

•

Tighten the grip screw.

Summary of Contents for 5300





































































Search results

Summary of Contents for 5300

Reviews:

Agria 5300, Operating Instructions Manual, Page: 22 / 68

Search results

Summary of Contents for 5300

Reviews: