18
Ride-on Brushcutter Sitting Bull
3
3. Devices and Operating Elements
Safety circuit
The safety circuit is integrated into the
driver's seat in connection with cutter gear
control and driving control, i.e. the driver
must be seated in the driver's seat for
starting and for operating the machine.
If the operator leaves the driver's seat and
the cutter gear or driving control is turned
on the engine cuts out.
Start Switch
0
= Off - engine shut off
I
= On - operation position
= Start position - when releasing the
key this automatically returns to the "
I
"
position
I
- Never operate the electrical
starter for longer than 5 seconds.
- Never turn ignition key to "START"
when the engine is running.
A/6
Warning Signal
the warning signal "beeper" sounds if
l
the key is at "
I
" and the engine is shut off
l
the engine is running and the oil pressure is too low or the engine temperature
is too high
- turn the engine off immediately and correct the cause.
Possible causes:
- Engine oil level too low - top up engine oil
- Engine oil filter is dirty -replace
- incorrect engine oil quality (viscosity) - change engine oil
- Engine temperature too high - ventilator grid dirty
è
cleaning
- Other items
è
-
Service
ç
I
- In case the start switch is turned on and the engine stands still, but the
beeper does not sound, it may be the oil pressure switch, the electrical
cable or the beeper is damaged - correct the cause!
B/22
32