Brush Cutter 4500 Hydro
39
5. Maintenance
Storage
For longer periods of no operation proceed as follows:
a) Clean thoroughly
Repair paint coat
b) Petrol engine preservation
see also
è
Engine
l
Drain fuel completely or fill fuel tank and add fuel stabili-
zer (agria no. 799 09).
- Observe enclosed instructions.
Let engine run for approx. 1 minute.
l
Change the engine oil.
l
Fill a tea-spoon (approx. 0.03l) of engine oil into the spark
plug opening. Slowly crank the engine.
l
Reinstall the spark plug and set the piston to compressi-
on via the recoil starter (pull the starter grip until resistance
is felt) - valves are closed.
l
Slowly crank the engine after every 2–3 weeks (spark-
plug connector is removed). Then set the piston to com-
pression again.
c) V-Belt and Clutch
Always only shut down the machine with the mulching drive
disengaged, otherwise problems could occur with the clutch
as a result of deformed V-belts.
d) Parking
To avoid severe corrosion:
l
to preserve the machine from atmospheric influences
l
do not park the machine:
- in humid rooms
- in rooms where fertilizer is stored
- in stables or adjacent rooms.
e) Covering the machine
Protect the machine with cloth or a similar cover.
0
