14
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners
X
Check for worn or damaged parts
X
X
Lubricate wheel bearings
X
Clean Sweeper
X
X
Clean/Lubricate gears
X
Bef
ore
each
use
Aft
er
each
use
Twice
a
year
Ev
ery
season
Bef
ore
st
orage
Ev
ery
tw
o y
ear
s
Service Dates
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
SCHEDULED MAINTENANCE
1.
Clean the sweeper after each use. Check the height
adjustment slot for packed debris
2.
Inspect for worn or damaged parts, such as brushes
and wheels. See figure 19.
FIGURE 19
3.
Every two years, remove the wheels and clean the
gears found inside the wheel housing. After cleaning,
lubricate with an even coat of light grease. To remove
the wheel, pop off the hub cap using a screwdriver
and remove the lock nut, flat washer and spacer from
the end of the bolt inside the sweeper. See figure 20.
CLEANING
1.
Clean sweeper housing with a soft brush or cloth.
2.
Clean debris from hopper bag with a brush or broom.
3.
Remove any material which has wrapped around
brushes or ends of brush shaft.
FIGURE 20
1.
Clean the sweeper and hopper bag thoroughly to help
prevent rust and mildew.
2.
To collapse the hopper bag for storage, remove the
two hopper support rods from the rear of the hopper.
3.
Store in a dry area.
CAUTION: Before storing
the sweeper,
always empty the hopper bag to avoid
spontaneous combustion.
STORAGE
MAINTENANCE
HEX BOLT
FLAT WASHER
FLAT WASHER
HEX LOCK NUT
HUB CAP
SPACER
HEIGHT ADJUSTMENT SLOT
HEX BOLT
FLAT WASHER