Agri-Fab 45-0456, Owner'S Manual

Page: 6 / 24

6
FIGure 10
FIGure 11
FIGure 12
Slide a rear hopper tube (11) onto the two upper 14.
hopper tubes (6). See figure 10.
Secure the upper hopper tubes (6) to the rear hopper 15.
tube (11) using two 1/4" x 1" curved head bolts (26)
and 1/4" nylock nuts (24). See figure 10.
noTe:
Hopper bag (3) not shown for clarity.
Slide the bag frame tube (1) through the front flap of 16.
the bag. See figure 11.
Secure the bag frame tube to the bottom hopper 17.
tubes using two 1/4" x 1.11" clevis pins (28) and 3/32"
cotter pins (19). See figure 11.
Secure the top and bottom hopper tubes together 18.
using two 5/16" x 3/4" hex bolts (17) and 5/16" nylock
nuts (21). See figure 11.
Using a hammer, tap a palnut (23) onto one end of 19.
the pivot rod (2). See figure 12.
Slide the end of the pivot rod that doesn't have a 20.
palnut on it through the holes in the side of the upper
hopper tubes and through the middle flap of the bag.
See figure 12.
Using a hammer, tap a palnut (23) onto the other end 21.
of the pivot rod (2). See figure 12.
2
2
23
FIGure 13
Insert the hopper support rods (7) into the holes in 22.
the upper hopper tubes and then into the rear bottom
hopper tubes as shown in figure 13.
noTe:
The hopper support rods will bend about as much
as shown in figure 13 when they are assembled.
7
7
17
17
28
28
21
19
19
21
1
11
26
26
24
24
6
6