AGRETO PFM II
© AGRETO electronics GmbH
page:3
1
Introduction
Thank you for choosing an AGRETO baler mounted moisture meter. You have
acquired a robust tool for daily use.
Please read this manual carefully before using the equipment.
2
Scope of delivery
1 Display Unit
1 Mounting bracket with 2 fixing screws
2 m Power cable with fuse
12 m Sensor cable
1 Sensor plate
Sensor mounting material: 4 x mounting screws M8 x 40, 8 discs, 6 x
Retaining rings and 6 x stainless steel nuts; 4 x nuts und 4 x plastic
isolation discs
1 Manual
3
Intended use
The AGRETO PFM II Baler mounted moisture meter is designed for measuring
the moisture of hay and straw bales during the pressing process.
In order to get meaningful values, the sensor plate must be installed in the baler
according to this installation instructions.
In practice it is usually not so important to get an exact moisture percentage,
but a review of the bale in terms of quality and shelf life. The higher readings
should be given priority in the bale.
User information:
The display unit is not waterproof and must be operated and stored in a dry
place
