3
cord from the receptacle. Keep the
cord from heat,oil and sharp objects.
Maintain tools carefully
.For best
performance,keep tools clean.Follow
i n s t r u c t i o n s f o r l u b r i c a t i n g a n d
changing accessories.Keep tool handles
clean,dry and free of oil grease.
Periodically inspect switches,tool cord
and extension cord.Check moving parts
for alignment and binding as well as for
breakage,improper mounting and any
other conditions that may effect its
operation.Have an authorized service
center replace or repair any damaged
parts.
Do not over reach.
Keep proper footing
and balance at all times.
Avoid accidental starting.
Be sure the
tool is turned off before plugging it in.Do
not carry a connected tool with finger
on the switch.
Check damaged parts.
Before using the
tool, damaged parts should be carefully
checked to be sure it will operate
properly and perform its intended
function. Have an authorized service
center repair or replace any damaged
parts.
Unplug tool.
When it is not in use and
b e f o r e c h a n g i n g a c c e s s o r i e s o r
performing maintenance be sure that
the tool is disconnected.
S t a y a l e r t .
W a t c h w h a t y o u a r e
doing,and use common sense.Do not
o p e r a t e a t o o l w h e n y o u a r e
tired,distracted or under the influence of
drugs or alcohol.
Store idle tools.
When not in use,store
tools in a dry and high or locked area-
out of reach of children.
ADDITIONAL SAFETY RULES
Wear ear Protectors.
Check the socket carefully for wear,
cracks or damage before installation.
Hold the tool firmly.
Always be sure you have a firm footing.
Be sure no one is below when using the
tool in high locations.
The proper fastening torque may differ
depending upon the kind or size of the
bolt. Check the torque with a torque
wrench.
When driving into walls, floors or
wherever " live" electrical wires may be
encountered, DO NOT TOUCH ANY MET
AL PARTS OF THE TOOL. Hold the tool
only by the insulated grasping surfaces
to prevent electric shock if you drive
into a " live " wire.
IMPORTANT:
Never attempt to use an incorrect sized
socket. This will result in stripping the head
of the bolt or nut and incorrect fastening
torque.
SAVE THESE INSTRUCTIONS
WARNING! Check the outlet voltage to be
sure it matches the voltage listed on the
nameplate.Using tool at voltages more than
10% greater is potentially dangerous and
constitutes misuse.This includes using
voltage boosters.
14.
15.
16.
17.
18.
19.
20.
1.
2.
3.
4.
5.
6.