2
SPECIFICATIONS
Manufacturer reserves the right to change specifications without notice
Note :
Specifications may differ from country to country
Bolt size
Standard bolt
M10-M16 (3/8"-5/8" )
High tensile bolt
M10-M12 (3/8"-7/16")
Square drive
12.7mm (1/2")
Impact per minute
0-2800
No load min
-1
0-2100
Power input
500W
Net weight
1.8Kg (3.96 Lbs)
Safety instructions
Warning! When using electric tools,always
follow basic safety precautions to reduce
the risk of fire,electric shock and personal
injury.Including the following read all
instructions and save them for future use.Be
sure everyone operating this tool reads and
understands these instructions.
Know your power tool.
Read this manual
carefully to learn your power tool's
applications and limitations as well as
potential hazards particular to his tool.
Keep work area clean and well lit.
Cluttered,dark work areas invite
accidents.
Keep children away.
All
visitors should
be kept at a safe distance from the
work area to avoid distracting the
operator and contacting the tool or
extension cord.
Avoid dangerous environments.
Do not
expose power tools to rain or use them
in wet or damp locations. Do not use
tools in the presence of flammable
liquids or gases.
Outdoor use extension cords
. When tool
is used outdoors,use only extension
cords intended for use outdoors and so
marked.
Use safety glasses.
Use a face or dust
mask if operation is dusty.
Dress properly
.Do not wear loose
clothing or jewelry,and contain long hair
since these may be caught in moving
parts.Wear rubber gloves and insulated
non-skid footwear when working
outdoors.
Secure work.
Use clamps or vise to hold
work securely and free both hands to
operate tool.
Guard against electric shock.
Prevent
body contact with grounded surfaces
such as pipes ,radiators,ranges and
refrigerator enclosures. Always check
the work area for live wires,and hold
your tool by insulated surfaces.
Keep hands away from all moving parts.
Do not force tool.
It will do the job better
and safer at the rate for which it was
intended.
Use right tool.
Do not force a small tool
or attachment to do the job of a heavy-
duty tool. Do not use tool for a purpose
for which it was not designed,such as
using a circular saw for cutting tree
limbs or logs.
Do not abuse cord.
Never carry tool by
its cord or disconnect by yanking the
6.
7.
8.
9.
10.
11.
12.
13.
1.
2.
3.
4.
5.
