Agogs Uphill Tour, User Manual

Page: 46 / 56

46
1 . Put the wheel back into the rear stay. Turn the wheel to find the position
where the axle fits into the dropout. Be careful to reposition the washers as
before demount.
2. Center the wheel and tighten nuts with wrench key size 1 8 mm.
3. Put plastic cups on axle nuts.
4. Turn the bike back to normal position.
5. Reconnect the motor connector and check that it is working properly. Fix
motor wire with plastic clamps again. You can use tape too. Do not use
binding wire!
6. Check shifting of derailleur.
7. Check rear brake efficiency.
Rear wheel mount