AGM AGP 2300 S, Original Instruction Manual

Page: 33 / 71

16
AGM AGP 2300 S (EN)
Troubleshooting
Trouble Possible cause Suggested remedy
Engine will not start 1. Low on fuel or oil content 1. Add fuel or oil
2. Ignition switch in “Off”
position
2. Turn the ignition to the
‘START’ position if using key
start, or ‘ON’
position if
manually starting.
3. Faulty spark plug 3. Replace spark plug
4. Choke in wrong position 4. Adjust choke accordingly.
5. Fuel shut-off valve in
closed position.
5. Open fuel shut-off valve.
6. Unit loaded during start-
up.
6. Remove load from unit.
7. Spark plug wire loose. 7. Attach wire to spark plug.
No electrical output 1. Faulty receptacle 1. Have service centre
replace receptacle.
2. Circuit breaker kicked out 2. Depress and reset
3. Worn Brushes 3. Have service centre
replace brushes.
4. Faulty power cord. 4. Replace cord.
Repeated circuit breaker
tripping.
1. Overload. 1. Reduce load.
2. Faulty cords or equipment. 2. Check for damaged, bare,
or
frayed wires on
equipment. Replace.
Generator overheating 1. Generator overloaded. 1. Reduce load.
2. Insufficient ventilation. 2. Move to adequate supply
of fresh air.