5
Victrix
USER MANUAL
CAUTION:
• To prevent thermal damage to the equipment, never point it (whether ON or OFF) directly at the
sun or any other source of high intensity light that the unprotected human eye cannot tolerate
(such as a welding arc). To prevent accidental exposure to these types of sources, never leave
the equipment around without the objective lens cap secured.
• DO NOT dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature changes, and
electrical shocks.
• DO NOT force the equipment controls past their stopping points.
• DO NOT leave the equipment activated during periods of non-operation.
• DO NOT store the equipment without first removing the batteries.
• Thoroughly clean and dry all items before placing them into the storage case.
• To avoid deformation or damage, remove the light suppressor from the Victrix before placing
the equipment in storage.
• Scope Mounting Systems are not recommended for installing the Victrix on firearms with
dynamic recoil (0.308 Win or stronger).
NOTES:
• The optical axes of the Victrix and day scope should be aligned. The distance between the
axes should not exceed 3 mm. If the difference in the axis heights of the Victrix and day scope
above the weapon rail exceeds 3 mm, you will need to replace the day scope mounting rings or
monoblock.
• To avoid losing unsaved data, DO NOT remove the batteries or disconnect the external power
source while the Victrix is on.
• Inadvertent sun damage is not considered a defect in material or workmanship, and is therefore
not covered in the product warranty.