AGM Global Vision
8
2 OPERATING INSTRUCTIONS
2.1. BASIC OPERATIONS
2.1.1
INSTALLING THE BATTERY
StingIR supports three kinds of batteries: CR123 (rechargeable lithium battery),
CR123A (nonrechargeable lithium battery), and 18650 (rechargeable lithium
battery). When using the 18650 battery, you need to replace the existing battery
cap with the 18650 battery cap.
To install a CR123(B) or CR123A battery, unscrew the battery cap(A) first, put
the battery into the battery compartment in the correct polarity(C), and tighten
the battery cap.
Before using the 18650 battery, you need to replace the CR123 battery cap(A)
with the 18650 battery cap(E). The replacement steps are as follows:
1. Unscrew the CR123 battery cap(A) and remove the silicone ring fixing the
battery cap.
2. Put the silicone ring fixing the 18650 battery cap(E) on the battery cartridge,
and adjust the silicone ring to abut the shell.
3. Install the 18650 battery(D) and tighten the 18650 battery cap.
FIGURE 2-1. INSTALL A CR123 BATTERY
A
B
C
FIGURE 2-2. INSTALL A
18650
BATTERY
E
D
C
