background image

AGM Global Vision

16

TABLE 3-1. TROUBLESHOOTING

FAULT

TEST OR CHECK

TROUBLESHOOTING

Unable to screw 

or open the 

cover of the 

battery holder

(a) Check whether the 

battery is installed in the 

correct direction.

(b) Check whether there are 

sundries or scraps around 

the knob of the battery 

cover.

(c) Check whether the 

battery cover is damaged, 

worn or deformed.

(d) Check whether the 

battery holder is damaged or 

deformed.

(a) Reinstall the battery. 

 

(b) Clean the threads of 

the battery cover and 

battery holder. 

(c) Perform the higher 

level maintenance. 

(d) Perform the higher 

level maintenance.

Unable to  

power on

(a) Check whether thebattery 

is installed, whether its 

direction is correct, and 

whether its power is 

sufficient.

(b) Check whether the On/

Off button can be pressed 

normally.

(a) Replace the old 

battery with a new one 

and install it correctly 

according to the 

instructions in Chapter 2.

(b) Perform the higher 

level maintenance.

Unable to

display

the image

(a) Check whether the 

lens hood is removed and 

whether the focal length is 

appropriate. 

(b) Check whether the 

objective lens is blocked 

during operation.

(c) Check whether the lens is 

damaged.

(d) Long press the UP button 

to perform manual shutter 

correction.

(a) Remove the lens hood 

and adjust the objective 

lens focusing knob. 

(b) Remove the barriers. 

 

(c) Perform the higher 

level maintenance.

(d) Perform the higher 

level maintenance if the 

fault persists.

After power 

on, it displays 

“The battery 

is running low, 

please replace 

the battery”

(a) Check whether the 

battery power is too low.

(b) Confirm that the battery 

voltage is consistent with 

the device Settings.

(a) Replace the battery. 

(b) Operation menu 

“Settings” -> “Battery 

Voltage”, set the voltage 

to be consistent with the 

actual battery voltage.

Summary of Contents for StingIR-384





















Reviews: