Agilent Technologies U3047AM12, User'S And Service Manual

Page: 72 / 84

66 User’s and Service Guide U3047-90001
U3047AM12 Service Information
Connect the RF Flex cables to the Test Port and RCVR OUT port indicated in Table 18 , the expected results
should be similar to Figure 54 on page 67 through Figure 56 on page 67 .
Table 18 Receiver Signal Path Test Instructions
Path # RF Path Description
Control Mode
<Address>.<Data>
Path Components
Insertion Loss (typical)
1
RCVR OUT to Ports 5
1
1. Use the RCVR OUT port associated with this group of test ports.
0.16 P5 CPLR, S13 & 14 Figure 54 on page 67
2 RCVR OUT to Ports 9 0.32 P9 CPLR, S13, 14 & 15 Figure 55 on page 67
3 RCVR OUT to Ports 13 0.128 P13 CPLR, S13, 14, 15 & 17
Figure 56 on page 67
4 RCVR OUT to Ports 6 16.16 P6 CPLR, S23 & 24 Figure 54 on page 67
5 RCVR OUT to Ports 10 16.32 P10 CPLR, S23, 24 & 25
Figure 55 on page 67
6 RCVR OUT to Ports 14 16.128 P14 CPLR, S23, 24, 25 & 27 Figure 56 on page 67
7 RCVR OUT to Ports 7 32.16 P7 CPLR, S33 & 34
Figure 54 on page 67
8 RCVR OUT to Ports 11 32.32 P11 CPLR, S33, 34 & 35 Figure 55 on page 67
9 RCVR OUT to Ports 15 32.128 P15 CPLR, S33, 34, 35 & 37 Figure 56 on page 67
10 RCVR OUT to Ports 8 64.16 P8 CPLR, S43 & 44 Figure 54 on page 67
11 RCVR OUT to Ports 12 64.32 P12 CPLR, S43, 44 & 45 Figure 55 on page 67
12 RCVR OUT to Ports 16 64.128 P16 CPLR, S43, 44, 45 & 47 Figure 56 on page 67