36
User’s Guide U3025-90001
U3025AE10
Operational Check Procedures
9. From the Cal Sets drop-down menu, select
999.1
and check
Enable
. Select the
Reflection Tracking(1,1)
term in the center drop-down menu and ensure that the
Enable
and
Error
Terms
are selected.
NOTE
You may also create a table on the PNA and enter the limit line stimulus and
response values. Select
Marker/Analysis
>
Analysis> Limit Test
>
Limit Test
ON
and
Limit Line ON
>
Global pass/fail display ON
, select
Show Table
.
Figure 35
PNA-X Setting the Test Limits
Figure 36
Reflection Tracking Trace (Port 1-12)
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
