Agilent Technologies TPS-compact X3580-64000, User Manual

Page: 246 / 312

16 Instructions for Use
Installation
246/312 TPS-compact User Manual / 87-901-010-01 (F )
Installation
CAUTION!
Do not remove the adhesive and protective cap before connecting the turbopump
to the system.
Do not install or use the pumping system in an environment exposed
to atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:
§
maximum pressure: 2 bar above atmospheric pressure
§
temperature: from +5 °C to +35 °C
§
relative humidity: 0 – 95 % (non-condensing)
In the presence of magnetic fields the pumping system must be
protected using a ferromagnetic shield.
The TPS-compact can be installed in any position. Fix the TPS-
compact in a stable position connecting the inlet flange of the
turbopump to a fixed counter-flange capable of withstanding a torque
of 50 Nm around its axis.
The turbopump with ISO inlet flange must be fixed to the vacuum
chamber by means of clamps or claws. The following table shows, for
each fixing device, the necessary number of clamps or claws and the
relevant fixing torque.
WARNING! The System must be installed in a way that allows an easy interruption of the
line voltage.