Restoring the GC to operating condition
21
9.
Reinstall the RFI cover.
10. Replace the pneumatics top cover.
11. Plug in the GC and turn it on.
12. If your GC did not detect the new NPD, check the following connections:
•
Detector card to main board
•
Manifold to pneumatics board
•
Heater-sensor connector
•
Bead cable to detector card
•
Signal cable to detector card
If you installed an EPC NPD but you have only temperature control for
the detector, check the connection between the flow manifold and the
pneumatics board.
Summary of Contents for NPD
Page 27: ......
