Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide
3
2
Getting Started
CAUTION
To avoid damaging or degrading the performance of the MXG, do not exceed 33 dBm (2W)
maximum
of
reverse power levels at the RF input. See also
Tips for Preventing Signal Generator Damage
on
www.agilent.com
.
NOTE
Software Updates
Is your product software up-to-date? Periodically, Agilent releases software updates to fix known defects and
incorporate product enhancements. To search for software updates for your product, go to the Agilent
Technical Support website at
www.agilent.com/find/TechSupport.
NOTE
For the N5161A/62A, the softkey menus and features mentioned in this chapter are only available through the
Web-Enabled MXG or through SCPI commands. Refer to
“Accessing the MXG (ATE) Web-Enabled Page” on
and to the
SCPI Command Reference
.
The MXG ATE blank front panel models, N5161A and N5162A signal generators, are part of the MXG
instrument family and unless otherwise indicated, all references to the MXG are inclusive of the MXG ATE
instruments.
Full LXI–B feature implementation is only available on instruments with firmware >A.01.50. A license may
be required to enable this feature and to download firmware versions >A.01.50. For information on new
firmware releases, go to
http://www.agilent.com/find/upgradeassistant
.
•
•
Signal Generator Physical Characteristics
•
Meeting Environmental and Electrical Requirements
•
•
Configuring the Display (N5181A/82A/83A Only)
•
Configuring for Remote Control
•
•
•
Returning a Signal Generator to Agilent Technologies
•
