manualshive.com logo in svg

Agilent Technologies N5171B, Manual, Page: 41 / 48

Share
Download
Agilent Technologies N5171B Manual Download Page 41

41

Security Issues for Certain Firmware Revisions

Recovering Erased System Files

Recovering Erased System Files

To recover the lost files, perform the following steps:

1. Obtain your instrument’s model and serial number.
2. Contact Agilent and request a replacement license file.

The Agilent representative will ask for the model and serial number.

3. Update the firmware to the revision specified in the "Update to" column of 

Table 9-1 on page 39

.

a. If problems occur when upgrading the firmware, manually enter as many license keys as possible 

using 

Utilities

 

Instrument Info

 > 

Options Info

 > 

Auxiliary Software Options

 

b. Upgrade the firmware again.

4. Open Internet Explorer and enter 

http://<instrument IP address>/update

.

5. Locate 

Recover Self-test System Files

 and click 

Execute

.

6. Locate 

Overwrite LICENSE.TXT

, cut and paste the replacement license file (obtained in Step 2) into the 

text box, and click 

Execute

.

7. Cycle the power on the instrument.
8. If configuration errors persist after completing the previous steps, contact Agilent again.

Summary of Contents for N5171B

















































Reviews:

No comments