Agilent Technologies N5171B, Manual, Page: 10 / 48

10
Products Covered by this Document
Document Purpose
Document Purpose
This document describes instrument memory types and security features. It provides a statement regarding
the volatility of all memory types, and specifies the steps required to declassify an instrument through
memory clearing, sanitization, or removal.
For additional information, go to:
http://www.agilent.com/find/security
IMPORTANT
Be sure that all information stored by the user in the instrument that needs to be saved
is properly backed up before attempting to clear any of the instrument memory. Agilent
Technologies cannot be held responsible for any lost files or data resulting from the
clearing of memory.
Be sure to read this document entirely before proceeding with any file deletion or
memory clearing.
Agilent Signal Generators PSG Signal Generator E8663D All
E8663B
b
All
E8267D
b
All
E8267C C.03.40 or higher
E8257N All
E8257D
b
All
E8257C C.03.40 or higher
E8247C C.03.40 or higher
ESG Signal Generator
E4438C
b
C.03.40 or higher
E4428C
b
All
a. For the N5161A/62A Signal Generators, the softkey menus and features described in this guide
are only available through the web-enabled interface or via SCPI commands. Refer to the
instrument Installation Guide , Programming Guide and SCPI Programmers Reference for more
information.
b. See “Recommended Software Upgrades” on page 11 for important firmware version information.
Product Family Name Product Name Model Number Firmware Revision