Using the Graphical User Interface
3
Transmission Test Set Quick Reference Guide
45
• Mapping Diagram
– this is used to select a mapping struc-
ture. Use the arrow navigation keys to select the required
mapping. Press
<Select>
when you have finished, or press
<Cancel>
to close the mapping diagram without changing
the settings. An example of a mapping diagram is shown
below.
• Checkboxes –
these
are used to set a control either OFF or
ON. For example, to enable Thru Mode move the highlight to
the checkbox and press
<Select>
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
