12
G3430-68640 Removable Oven Door Accessory Installation Guide
Install the inlet top cover
1
Place the inlet top cover onto the GC. Be careful to not damage any gas
lines during installation.
2
Install all T- 20 Torx screws to secure the cover to the GC.
3
Reinstall any mounting posts to the top cover.
Complete the installation
1
If necessary, install any automatic liquid sampler (ALS) devices and
connect any transfer lines to your GC inlets. Refer to your relevant
instrument documentation for details.
2
Turn on the source gases.
3
Turn on the GC and connect the power cord.
Removing the Door
To remove the door, do the following:
1
Cool the GC oven to ambient temperature.
2
Open the door, then pull the top hinge lever down and tilt the top of
the door out to release the top pin from the hinge.
3
Using both hands, carefully lift off the door from the lower oven door
pin and remove the door from the GC.
WA R N I N G
To prevent personal injury, take care to adequately support the door using both
hands or a second person. Failure to properly support the door could cause it to
fall.
