5
Installing the actuator on a side mount bracket
1.
Install the side mount bracket on the left side of the GC using four
machine screws (6890 GC) or four self-tapping screws (4890/5890 GC).
2.
Attach the clamp ring to the back of the bracket with two screws.
3.
Align the actuator assembly with the upper or lower standoffs. The
cylinder must be down. Insert the actuator drive though the hole in the
bracket, and secure with two T-20 Torx screws.
Torx T-20 screw
Actuator, cylinder down
Side mount bracket
Valve (to be
installed later)
