User Information
Bar code reader
17
10
Pull the backing through until it points straight up. See
Figure 9
.
Using the applicator
1
Place a bottle in the opening in the top plate. It will only fit in
one position (to the right). See
Figure 9
.
2
Pull the backing up until the end of a label appears under the
bottle.
3
Hold the bottle in position (let it rotate) and continue to feed
the label onto the bottle.
4
Remove the bottle and press down the trailing edge of the
label.
5
Verify correct position with the gauge on top of the label
applicator. With the bottle on the ledge, there must be no
white space above or below the code and visible in the slot.
See
Figure 9
.
Figure 9
Ready to apply labels
Label position guage
Vial