Getting Started
Agilent Electrothermal Temperature Controller ETC 60 User’s Guide
23
Installing the Workhead Bracket Adapter and Bracket
1.
Lower the hooks of the ETC Bracket onto the pivot points of the bracket
adapter.
Figure 22.
Workhead bracket adapter fitted with bracket
2.
With the Zeeman Workhead removed, hook the adapter fitted with the ETC 60
bracket on the top rear edge of the sample compartment. See Figure 25 on
Page 24.
3.
Continue to ‘Installing the Workhead’ on Page 23.
Installing the Workhead
Figure 23
The ETC 60 workhead
Temperature cable connection
Quartz
cell
Spray chamber adapter
Inlet cell stem
Back of workhead
Front of workhead
Pivot point
Pivot point
Bracket
Bracket adapter
(image cropped for clarity)
Vertical control
Horizontal control
Cable hole
