16
E5400-Pro Series Soft Touch User’s Guide
1
Overview, Installation, and Selection of Probing Options
The E5405A-Pro Series 17-channel Differential Soft Touch Probe
(for analyzers with 90-pin cable connectors)
The Agilent E5405A- pro series probe is a 17- channel,
single- ended, soft touch probe compatible with the Agilent
logic analysis modules listed in
on page 12. It is
capable of capturing data up to the rated maximum state
(synchronous) analysis clock rates of all the supported
analyzers, with differential signal amplitudes as small as
200 mV peak- to- peak. A retention module must be installed
on the target system board to attach the probe to the board.
A kit of five retention modules are supplied with each
probe. Refer to
information on ordering more.
See
on page 19 for
information on designing your target system board.
Figure 4
E5405A-pro series differential soft touch probe and
E5403A retention module
200 mV p-p
E5405A-pro series
17-channel
differential
soft touch probe
E5403A retention
module
Differential Input Amplitude
Definition
For differential signals, the
difference voltage Vmax - Vmin
must be greater than or equal to
200 mV p- p
