manualshive.com logo in svg

Agilent Technologies E5070B ENA Series, Installation And Quick Start Manual

Share
Download
Agilent Technologies E5070B ENA Series Installation And Quick Start Manual Download Page 24

24

Chapter 2

 

Installation

Installing Front Handles/Rack Mounting Flanges

Figure 2-4 

Installing front handle/rack-mount kits

How to Install the Handle Kit (Option 1CN)

The handle kit is used for transport and relocation of the E5070B/E5071B. While referring 
to Figure 2-4, install the handle kit by following these steps.

Step 1.

Remove the adhesive-backed trim strip (1) from each side of the outer frame of the 
E5070B/E5071B front panel.

Step 2.

Use the provided screws to mount the front handles (2) on each side of the 
E5070B/E5071B front panel frame.

Step 3.

Attach the provided modified trim strip (3) to each front handle in order to cover the front 
panel locking screws.

WARNING

If the installed front handle becomes damaged, replace it with a new one immediately. 
A damaged handle can break while moving or lifting the instrument and cause 
personal injury or damage to the instrument.

Summary of Contents for E5070B ENA Series





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands